Skip to Content
Voice AgentVoice Agent Integrations

Voice Agent Integrations

PBX Integration Requirements

Purpose

This page describes how the ThinkVoice Voice Agent platform is integrated with the customer’s IP PBX over a SIP trunk, including the required technical information, the process and the items to verify.

Information Required for the SIP Trunk Integration

InformationDescription
Host / IP AddressIP address or domain of the PBX or SIP trunk server
Phone NumberPhone number (DID) to be used on the SIP trunk
UsernameSIP username (optional, but used by most systems)
PasswordSIP password (optional, but used by most systems)

ThinkVoice IP Information

To ensure secure communication, the server IP addresses on both the carrier and ThinkVoice sides must be mutually authorized (whitelisted).

ThinkVoice IP addresses are as follows:

NameValue
ThinkVoice Cluster IP85.111.80.106
ThinkVoice VPN IP85.111.80.107
ThinkVoice SIP Server URL - 1sip.livekit-boxes.thinkvoice.nsarge.com
ThinkVoice SIP Server IP - 185.111.80.110
ThinkVoice SIP Server URL - 2sip.livekit-boxes.bt.thinkvoice.nsarge.com
ThinkVoice SIP Server IP - 2185.201.213.253

SIP Connection Details

ParameterValue
ProtocolSIP
TransportUDP
Port5060

Integration Process

Once the information has been shared, the following steps will be carried out:

  1. The SIP trunk configuration will be completed.
  2. Connection tests between the PBX and ThinkVoice will be performed.
  3. Inbound and outbound call scenarios will be verified.
  4. Audio quality and DTMF tests will be performed.
  5. After the integration is verified, production tests will be scheduled.

If needed during the integration, our technical teams can run joint tests with yours.

Last updated: